Publicité
Les langues disponibles
Les langues disponibles
During operation...
During the cooking process, you may open the
door at any moment, as:
THE PRODUCTION OF MICROWAVES IS
IMMEDIATELY INTERRUPTED.
The grill is deactivated and remains at a high
temperature.
The timer stops and the screen shows the
operating time that is left.
If you wish, you may:
1. Turn around or move the foods to ensure
uniform cooking.
2. Change the power of the microwave, using the
"–" and "+" buttons.
3. Select another function, using the function
buttons.
4. Adjust the operating time that is left, by using
the ROTATING BUTTON.
Close the door again and press the start button.
The appliance will start to function again.
Function interruption
To interrupt the programme, press the STOP
button or open the door of the appliance.
If you wish to cancel the cooking process, close
the door again and press the STOP button. The
oven will beep and the screen will display the
time.
End of programme
When the programme is finished, the microwave
beeps 3 times and the screen displays "End".
The beeps are repeated every 30 seconds, until
the door is opened or the "STOP" button is
pressed.
Energy Saving
This microwave has a special energy-saving
mode which cuts in automatically after ten
minutes of inactivity.
In energy-saving mode, all the keys on the panel
go off and the display shows the time.
This function is automatically deactivated when
the user presses a function key.
Energy-saving mode is also activated by pushing
the rotating Button into its inner position. In this
position the keys remain off, the keyboard is
deactivated and the display shows the time.
To switch the microwave back on, just press the
rotating Button again, leaving it in its outer
position.
EN
39
Publicité
