Setting The Time; Setting The Alarm - BREIL 3S10 Mode D'emploi

B

SETTING THE TIME

Pull out the crown
•
this does not happen, press button
T urn the crown anticlockwise to adjust the hour and minute hands forward to the
•
correct time, and clockwise to move them backwards.
T urning the crown rapidly also increases the speed of the adjustment. T o stop the fast
•
resetting motion, turn the crown slowly. By turning the crown slowly , the adjustment
is carried out in steps of 20 seconds.
• Restart the watch by pushing the crown back to position (0).
C

SETTING THE ALARM

The watch must be in the normal time mode.
The normal time and alarm time are indicated by the same minute and second hands.
• Switching to alarm time indication
Moving the alarm switch (ALM) (1) to ON and pulling the crown out one stop, the hour
hand and minute hand move rapidly in a clockwise direction and stop at the alarm set
time. A confirmation "bip" is heard.
to position (2), the second hand momentarily returns to "0". (if
to perform the operation manually)
3