AVL DITEST OBD 1000 Manuel D'utilisation page 9

AVL DiTEST OBD 1000
Operation
3
Please observe the description of your diagnostic program.
In Case of Error
4

Please note the display elements and the signal transmitter, see chapter 1.2.

Make sure that AVL DiTEST OBD 1000 has been started properly.

Close the diagnostic program and start it once again.
 Disconnect PC  AVL DiTEST OBD 1000  vehicle and establish a new connection.

Please note the error messages and the proposed solutions on the screen.
Maintenance
5
Make sure that the contacts of the USB-socket and the OBD-plug are not dirty and not damaged.
Clean the casing, the USB-socket and the OBD-plug, if necessary, using a mild cleaning agent.
Warranty
6
6.1 New Devices
For new devices the warranty period is 12 months.
The agreements with your supplier apply.
Generally excluded from the warranty are wear and tear parts and accessories.
Valid for the implementation is the date of the delivery document to the final customer.
The warranty expires due to:

Mechanical damage (e.g. dropping the device, etc.)

Penetration of liquid (e.g. water, oil, acids, etc.)

External intervention (e.g. repairs carried out by non-authorized people)

Improper operation (e.g. cleaning with air pressure)

Improper storage, maintenance and care (e.g. cleaning the device with solvent-based
cleaners)
6.2 Exchange or Loaner Units
The agreements with your supplier apply.
Valid for the implementation is the date of the delivery document to the final customer.
6.3 In Case of Damage
In case of damage, please contact your respective AVL DiTEST representation / the corresponding
AVL DiTEST partner in your country.
User Manual
Operation
3