General Description - AVL DITEST OBD 1000 Manuel D'utilisation

AVL DiTEST OBD 1000
General
1
1.1

General Description

With the AVL DiTEST OBD 1000 plus a suitable diagnostic program all data relevant for an OBD-
test (OBD: On Board Diagnosis) may be read out from the error memory of the engine control unit.
The communication with the PC is wireless via Bluetooth. As an alternative a USB-cable may be
used.
Always follow the safety instructions enclosed with the AVL DiTEST OBD 1000!
(1) LED
green/red/yellow
(2) USB Mini
B-socket
5-pin
(3) LED blau
OBD-Stecker
Fig. 1-1
1.2 Display Elements and Signaling Devices
No. LED
(3) blue
(3) blue
(1) green/red/
yellow
(1) green/red/
yellow
(1) green/red/
yellow
(1) green/red/
yellow
(1) green/red/
yellow
(1) green/red/
yellow
User Manual
WARNING
Status
off
on
flashes yellow once
indicator peeps once
lights up green
flickers green
flashes red 3x
indicator peeps 3x
flickers orange
flashes green once
and red twice
Meaning
Device not supplied with power (from the OBD-socket of
the car)
Device supplied with power (OBD-socket of the car)
Device ready for operation
Connection to PC (Bluetooth or USB) is established
Connection to PC (Bluetooth or USB) is established data is
being transferred
Device supplied with power but for more than 20 seconds
without connection to PC ('loss protection')
Firmware update in progress:
please wait
Error during firmware update or no firmware loaded:
repeat update
General
(4) OBD-plug
1