Publicité
GROUNDING INSTRUCTIONS
Grounded
Outlet
Prise avec contact
de mise à la terre
Enchufe a
tierra
Grounding Pin
Contact de mise
à la terre
Clavija a tierra
Figure A
Figure A
Figura A
This vacuum cleaner must be grounded. If it
should malfunction or breakdown, grounding
provides a path of least resistance for elec-
tric current to reduce the risk of electric
shock. This vacuum cleaner is equipped with
a cord having an equipment-grounding con-
ductor and grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in accor-
dance with all local codes and ordinances.
DANGER
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified electri-
cian or service person if you are in doubt as
to whether the outlet is properly grounded.
Do not modify the plug provided with the
vacuum cleaner – if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
This vacuum cleaner is for use on a nominal
120-volt circuit, and has a grounding plug
that looks like the plug illustrated in Figure
A. Make sure that this vacuum cleaner is
connected to an outlet having the same con-
figuration as the plug.
No adapter should be used with this vacuum
cleaner.
Note: Before you plug in your commercial
vacuum cleaner, make sure that the volt-
age indicated on the rating plate located at
the back of the vacuum cleaner is the
same as your local supply.
- 10 -
Dégagement des obstructions
Le tuyau situé à l'arrière de l'aspirateur
transporte la poussière de la tête
d'aspiration au sac à poussière. En cas
d'obstruction:
➢ Débrancher l'aspirateur.
➢ Ouvrir, en tirant, le couvercle d'entrée
d'aspiration et vérifier qu'il n'y a pas
d'obstruction.
➢ Séparer le tube du tuyau court et vérifier
s'il y a obstruction dans l'un ou l'autre.
➢ Brancher l'aspirateur et le mettre en
marche.
➢ Retirer le tube et étirer le tuyau dans un
mouvement d'accordéon pour dégager
toute obstruction.
➢ S'il y a toujours obstruction, arrêter
l'aspirateur et le débrancher.
➢ Retirer la plaque inférieure. Voir:
" Enlèvement et installation de la plaque
inférieure"
➢ Vérifier l'entrée du tuyau court et
éliminer toute obstruction.
- 3
Publicité
