Publicité
G10195
1 Air inlet
5 Tray
COOKING
Carefully wash all accessories and the inner housing first. Allow to ventilate the internal compartment
keeping the container (6) away for about 30 minutes. Before starting with the first cooking, turn on the
appliance for 10 minutes at the maximum temperature.
- Connect to a suitable and earthed power socket.
- Extract container (6) with care and check that the tray (5) is properly mounted on the base of container.
- Insert food in the container (6) and replace the container into the housing (3).
- If appliance went in standby, press
- Set program, temperature, time of cooking, as explained in following paragraphs. Press
Caution: Never use container (6) without tray (5). Do not touch container or inner parts of appliance
during cooking and until complete cooling. Touch only the handle (8).
- Some foods should be mixed and shaked at half cooking. Take the handle (8) and extract container (6).
Shake it, then replace in its position.
- When you ear the timer sound (5 beeps), cooking time is finished. Extract container and check if food is
ready. If not ready, replace container in its position and set additional cooking of some more minutes.
Note: appliance can be switched off manually, pressing
- To remove food, take out container pour food in a dish.
Be careful to the hot steam when you remove container after cooking.
Don't turn the container (6) upside down, because oil and cooking residues on the bottom of container
could drip on the foods.
-
Once cooking finished, if you want to start another one, air fryer is immediately ready.
CONTROL PANEL
A. Icons for 6 programs
E. Increase button
FUNCTIONING
MANUAL FUNCTION
- If appliance went in standby, press
- Press temperature button (G) and set temperature with the buttons (E ed F).
- Press time button (H) and set cooking time with the buttons (E ed F). Press
PRESET PROGRAMS FUNCTION
Program
Fries
Meat
Fish
-
If appliance went in standby, press
-
Pressing button Menù (B), you can choose between 6 preset programs.
-
Once the program is chosen, press
o Press temperature button (G) and set temperature with the buttons (E ed F).
o Press time button (H) and set cooking time with the buttons (E ed F). Press
Note. Time and temperature set on each program are studied to have correct cookings for the relative
food. It is advised to change time and temperature only based on experience (eg. Previous cookings not
finished or too long).
During cooking:
-
Do not extract the container if not necessary to mix or check food cooking.
-
You can stop appliance pressing button ( ). You can switch off pressing button ( ) for 3 seconds.
2 Control panel
6 Container
on the control panel (2).
B. MENU button
F. Decrease button
on control panel (2). Press one of the programs (A).
Time
Temperature
20
200
15
180
15
180
on the control panel (2).
to start cooking, or:
3 Housing
7 Air outlet (on the back)
on the control panel (2).
C. ON/OFF Button
G. Temperature button
Program
Chicken thighs
Shellfish
Cakes
8 Handle
to start cooking.
D. Display
H. Time button
to start cooking.
Time
Temperature
25
180
12
160
20
160
to start cooking.
12
Publicité
