Publicité
Thank you for choosing our products! We really appreciate your trust in our product and wish you a good and safe journey at
all times!
Please read these installation instructions carefully before assembly.
1.
ATTENTION:
Important safety instructions. If you are not a trained mechanic, contact a specialist workshop to install this
license plate holder. Failure to follow the installation instructions can cause damage to your vehicle and void the warranty.
No liability is accepted for consequential damage. The manufacturer accepts no liability for damage caused by improper
installation of this BRUUDT license plate holder. Improper use of this product can impair driving safety. Unauthorized
reworking and/or modification of the product can lead to functional failure and is not permitted. Structural changes to the
parts are not permitted and will result in loss of liability and warranty claims. Please keep these instructions for future
reference.
2.
ATTENTION:
All parts and connections removed from the motorcycle must be reassembled in accordance with the vehicle
manufacturer's instructions or replaced with parts and connections supplied by us. Unless otherwise specified, secure all
threads with screw locking. Unless otherwise specified by the vehicle manufacturer or our company, all screws and nuts
must be tightened in accordance with DIN / ISO. After assembly, ensure that all previously removed parts and connections
have been properly reassembled.
3:
ATTENTION:
This product was developed for vehicles in their factory condition. Compatibility with original accessories or
with accessories from other manufacturers cannot be guaranteed. When using additional original accessories or accessories
from other manufacturers, you should check the clearance, fit and possible collisions!
4.
ATTENTION:
If you have side reflectors on the original license plate holder, these must be installed in another (suitable)
place or replaced with new reflectors.
5.
GENERAL INFORMATION:
carefully and make sure that all parts in the parts list are present and not damaged. Make sure that your vehicle is standing
securely and cannot fall over. Turn off the engine and remove the ignition key. If necessary, allow the engine/exhaust to cool
down. Disconnect the vehicle battery when working on the electrics. Make sure that you only use suitable tools. Have a
second person help you with the assembly work.
This manual is based on our current knowledge. We make no legal claims as to its correctness. We reserve the right to make
technical changes.
14
Installation instructions/safety instructions
BRUUDT license plate holder for Yamaha MT-03 and R3 from 2015
Art.No.: Y-4009-MT03-R3
Observe any country-specific regulations or TÜV regulations. Read the assembly instructions
Publicité
