Publicité
3. Install the Battery Box
•
Remove the extension cable
attached at the back of the bowl
•
Plug the cable into the battery box
and secure the water-proof nuts.
•
Place the battery box in its proper
position shown on the right. The
batteries and cables are divided
into positive and negative poles. Do
not forcefully connect them. Doing
so may damage the product. If you
have any questions, please call our
support team at 847.458.2334.
4. Position the Toilet and Wax Ring
Position the wax ring on the flange. Remove the access covers from the sides of the
toilet and the cap from the water inlet on the back of the toilet. Align the toilet over
the flange and bolts. Carefully lower the toilet onto the flange.
14
PRODUCT INSTALLATION
See page 18 to see how to replace the
battery box.
Wax
5. Secure the Toilet Base
Secure the toilet base. Press down evenly on the toilet to set the wax ring.
Install a washer and nut onto each bolt. Hand tighten the nuts. Use a wrench to
tighten the nuts one quarter turn beyond hand tight.
6. Connect the Water Hoses
Attach the toilet hose and bidet hose to the t-valve and bidet toilet.
Then, connect the t-valve to the water supply valve.
Bidet Hose
T-Valve
Water Supply
Toilet Hose
PRODUCT INSTALLATION
15
Publicité
