Publicité
MAINTENANCE
Maintenance is required to ensure continued normal use.
NOTE:
Unplug the power cord and turn off the water
supply before maintenance.
Cleaning the Product
1.
Wipe dust or spills with a soft wet cloth.
2.
A brush, cloth, or sponge may be used to clean
the ceramic area. Do not use abrasive cleaning
solutions, such as alcohol, bleach, paint thinner,
cresol, benzene, etc.
Do not spray water or detergents on the toilet,
remote control or the power cord.
Doing so may cause electric shock or fire.
Cleaning the Nozzle
Press the "Nozzle Clean" button on the remote control
without occupying the seat. The nozzle will extend.
Proceed to clean with a soft toothbrush.
forcefully pull or push the nozzle.
Replacing the Battery Box
The battery should be kept out of children's reach.
Please ensure that the battery's polarity is correctly
matched. If they are incorrect it may lead to leaks or
damage. The battery box is water proof. Please make
sure all the screws are tightly secured to ensure that
the box is properly sealed.
1.
Loosen the battery box screws
and remove the cover. Remove
the battery and safely discard it.
2.
Load the new AAA battieres
and re-secure the screws.
3.
Place the battery box back into its place.
18
MAINTENANCE
Do not
Cleaning the Mesh Filters
To clean the mesh filters, the bidet top will need come off.
1. Turn off the water supply and unplug the power cord.
2. Unscrew the wing nut behind the bidet.
3. Lift the lid and seat up. Remove the white rubber caps that
are covering the two screws underneath.
4. Unscrew the two screws from the base using a Phillips screwdriver.
5. Close the lid and seat and seat. Then pull the top forward.
6. Unscrew the bidet hose connected to the inlet and t-valve.
Unscrew the toilet hose. You may need to use an adjustable wrench.
7. Use pliers and carefully pull out the 3 mesh filters.
8. Gently clean the mesh filters using a toothbrush and light cleaning solution.
9. Return the longer filter in the t-valve and shorter filters into the inlets.
10. Turn the water supply back on and plug the power cord in.
MAINTENANCE
3 mesh
filters
19
Publicité
