Publicité
Auto Flush
The toilet will automatically flush once the seat is unoccupied.
Kick Button Features
•
Tap the kick button once to open the lid.
•
Tap the kick button a second time to raise the seat.
•
Tap the kick button a third time to close the seat and
lid and flush the toilet.
Note
: Temperature, pressure, and nozzle position settings are restored to
default settings after loss of power. The night light will turn on by default.
12
GETTING STARTED
INSTALLATION GUIDE
BEFORE INSTALLATION
•
Do not plug in the power cord until installation is complete.
•
Please contact our service center at 847.458.2334 for alternate
fittings or assistance with this process.
•
Check your water supply. The lowest acceptable water pressure is
0.14 MPa. The highest acceptable water pressure is 0.75 MPa. The
toilet cannot reach full cleaning functionality if the water pressure
cannot reach 0.14 MPa.
Open the box right side up.
Remove the accessories
before removing the unit.
1. Turn Off Water
Turn off the water shut-off valve.
Drain the toilet tank completely
by flushing the toilet. Unscrew the
hose connected to the toilet tank.
You may want to have a towel
ready to catch any residual water.
2. Remove Toilet
Find the floor bolts securing the toilet
at its base. Carefully wiggle the toilet
from side to side to loosen the wax ring
seal. Lift the bowl off the bolts and set
it aside. Remove the wax ring.
PRODUCT INSTALLATION
Existing
Toilet Hose
13
Publicité
