Publicité
3. INSTALLATION
3.1. Site selection
WARNING : Before proceed to installation your spa, please make sure that the
selected location meets the following conditions :
•
A level place in order to avoid any defect, hernia or leakage.
•
Wide enough to support the spa and its pump unit.
•
•
Sheltered from the sun and bad weather.
•
Clean and free from sharp objects.
•
Devoid of aggressive vegetation on the ground.
Failure to comply with these rules may result in property damage or personal injury.
Use a sun cover
WARNING: The GFCI plug must be tested before each use.
Do not use if GFCI test fails and see chapter 6.1.
1. Insert the plug into the power outlet.
2. Press the <<RESET>>button,the indicator light turns red.
3. Press the <<TEST>>button,the indicator light turns off.
4. Press the <<RESET>>button,the indicator light turns red.
The GFCI works properly.
Place in a clean environment
9
Ensure its level
US
Publicité
