Publicité
turn on at same time
The pump does not stop heating until the current water temperature reaches the
set temperature; and the heating system will restart after the current water tem
perature drops 2°C below the set temperature automatically.
Maximum heating temperature: 40°C (104°F)
Important :
After 150 cumulative hours of operation, an alarm will sound on the heater to
remind you to clean your filter. You can reset the heater by holding the filter
button for 5 seconds to reset the timer.
To activate the anti-freeze function, press and hold the heating button for 3 seconds.
The screen will display "AFZ." Once the anti-freeze function is activated, other functions
will stop working. Press and hold the heating button for 3 seconds to deactivate the anti-
freeze function.
Notes:
After activating the anti-freeze function, the pump will automatically activate the heating
function when the water temperature is below 5°C (41°F). The heating function will be
turned off once the water temperature reaches 10°C (50°F).
It is recommended to manually activate the anti-freeze function when the weather
temperature is below 5°C.
4.3. Spa cover and security
After each use, the control panel must be locked and the spa must be coated with its
top cover and it must be attached to the base protector with the safety buckles.
Each safety buckles has a lock system ; closed buckle, the latch in up position locks
the buckle, the latch in down position unlocks the buckle.
The top cover keeps the heat from the water and secures the spa.
Open the faucet to let water flow into the SPA.
Close the faucet when the water level reaches
the recommended level.
12
Publicité
