Publicité
1.Align the fasteners on the pool cover with the fasteners on the
1
SPA wall, then install the fasteners.
2.Push the fasteners on the SPA wall upwards to prevent them
√
from coming off.
2
×
Do not tighten the rope when installing each fastener. First, fasten
all the fasteners, then tighten the rope to ensure the pool cover fits
perfectly over the SPA.
Installing the pool cover on the SPA when not in use prevents leaves and other
debris from falling into the water.
Using the inflatable cover and pool cover during heating improves heating efficiency
and saves energy.
Air inlet
Connect the SPA pump to the air hose, then use
the bubble button to inject air into the pool cover.
Place the inflatable cover on the water surface.
Note: If the inflatable cover is too large and
cannot fit into the SPA, it may have too much
air inside. You can unscrew the air plug to
release the excess air.
13
US
Publicité
