Publicité
5.3. Drainage and storage
Drainage
1.Check the stopper on the bottom of the pool and the drain cap.
2.Unscrew the drain cap.
3. Install the drain connector. Then connect a household hose for drainage.
4.Remove the stopper on the bottom of the pool. Completely drain all water
from thespa pool.
Once empty, the pool can be cleaned with soap and water.
5.Press the bubbling button to blow out the water inside the jet holes. Unplug the
pump, remove the filter cartridge from the inner wall of the pool.
6.Use a towel to wipe off the pool, dry 24 hours.
7.Unscrew the valves to deflate the pool.
8.Fold the pool.
It is recommended that store the SPA in its original package in a warm dry place.
5.4. Repair kit
Little holes or puncture can be repaired with the repair kit included and glue reserved to
spa liner.
1. Find the leak.
2. Thoroughly clean the area surrounding the leak.
3. Cut a piece of repair material in round shape, which should be larger than the dam
aged area.
4. Apply adhesive to the underneath side of the patch and around the area to be re
paired.
to dry. After patch has dried, apply glue around the edges for a complete seal (dry 4
15
US
Publicité
