Hapro Luxura X5 Mode D'emploi page 9

Masquer les pouces Voir aussi pour Luxura X5:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
A
Start
B
Increase body cooling Decrease body coolingr
C
Start
D
Stop
A
Increase volume
B
Decrease volume
C
Channel selection
Control without the use of an external timer or coins:
The tanning time can be decreased by pressing the "start" button once.
The display will show "SET" and the set maximum tanning time.
Use the "decrease" "increase body cooling" buttons to decrease and increase the tanning time.
The sun bed can be started by pressing the "start" button.
The equipment will pause when the "stop" button is pressed once. The lights will go out and the ventilator will continue for another
3 minutes. The tanning time will keep counting down. The tanning session can be resumed at any time by pressing the "start" button
again.
When you press the "stop" button for the second time, the sun bed will enter the compulsory cooling stage. The tanning session has
been completed.
Note:
A. If the sun bed is restarted within 3 minutes after stop has been pressed, it is possible that the face tanners do not switch on.
These need to cool down for at least 3 minutes, after which they will switch on automatically.
B. If the "stop" button is pressed, the airco will switch off after a 5 minute delay. Following these 5 minutes, the airco also has a
cooling down period of 3 minutes.
C. The tanning time will count down.
Other control functions:
Press the "increase volume" button to increase the volume of the speakers.
Press the "decrease volume" button to decrease the volume of the speakers.
The volume can be set to 7 different levels. The default level is 4 when the tanning session starts.
Channel selection. Use the "channel selection" button to select the desired music channel.
There is a choice of 4 music channels.
Note:
a. if no Soundaround package has been connected the above buttons will not be active. The display will show "not present" when
you press any non-active buttons.
b. If a Soundaround system is connected the software will detect this automatically, and the accompanying buttons will be
activated.
If an MP3 option has been connected, there will be a choice of 5 music channels. Channel 0 is always the channel used for listening to
MP3 music.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Luxura x7

Table des Matières