WARNING:
DO NOT STORE GRILL INDOORS UNLESS THE CYLINDER IS DISCONNECTED. DO NOT STORE CYLINDER
IN A BUILDING, GARAGE, OR ANY OTHER ENCLOSED AREA, AND KEEP OUT OF REACH OF CHILDREN
AT ALL TIMES.
INSTALLER FINAL CHECK
Maintain specified clearance of 91.44 cm (36 in) from combustible materials and construction.
1.
All internal packaging has been removed.
2. The hose and regulator are properly connected to the LPG cylinder.
3. The unit has been tested and is free of leaks.
4. The gas supply shutoff valve has been located.
WARNING:
1. DO NOT STORE SPARE LPG CYLINDERS UNDER OR NEAR THIS APPLIANCE.
2. NEVER FILL THE CYLINDER BEYOND 80 PERCENT CAPACITY.
3. IF THE INFORMATION IN ITEMS 1 AND 2 IS NOT FOLLOWED EXACTLY, A FIRE CAUSING DEATH OR
SERIOUS INJURY MAY OCCUR.
STEP 3
TO TEST
1. Make sure the burner valves are in the "OFF" () position.
2. Identify your regulator type. Turn the gas supply on at source
by following the instructions specific to that regulator.
Screw-on regulator
Turn the valve handwheel, located at the cylinder,
anti-clockwise.
Clip-on regulator
Move the regulator lever to the ON position.
3. Apply the soap solution to all gas fittings. Soap bubbles will
appear where a leak is present.
4. If a leak is present, immediately turn the LPG cylinder valve
to the CLOSED position and tighten leaky fittings.
5. Turn the LPG cylinder valve back to the OPEN position and
recheck.
6. Should the gas continue to leak from any of the fittings,
turn the LPG cylinder valve to the CLOSED position
and contact our Customer Service Department at:
1-800-913-8999 (USA) or 1-909-598-1812 (International).
Languages spoken: English, Spanish and French
8 a.m.-5 p.m. PST Monday-Friday. Or email us at:
servicedk@nexgrill.com.
7. If there is evidence of excessive abrasion or wear, or the
hose is cut, it must be replaced prior to the outdoor cooking
gas appliance being put into operation.
12