Using The Small Space And Main Space At The Same Time; Programming Cooking - Hotpoint OK 1037ELDP 20 X/HA S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
LOW TEMPERATURE modes
GB
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
PIZZA mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
SUCCESS cooking modes
! The temperature and cooking duration are pre-set values,
guaranteeing a perfect result every time - automatically.
These values cannot be adjusted and use the C.O.P.®
(Programmed Optimal Cooking) system. The cooking
cycle stops automatically and the oven indicates when the
dish is cooked. You may start cooking whether the oven
has been preheated or not. The cooking duration can be
customised according to personal tastes, modifying it -
before the start time - by ±5/20 minutes depending on the
selected programme. Once cooking has begun, it is still
possible to modify its duration. If the value is modified before
cooking begins, it is stored in the appliance memory and
suggested again when that cooking mode is next used. If
the temperature inside the oven is higher than the suggested
value for the selected mode, the text "Hot" appears on the
TEMPERATURE display and it will not be possible to begin
cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BEEF mode
Use this function to cook beef and pork. Place the food
inside the oven while it is still cold. The dish may also be
placed in a preheated oven.
CHICKEN mode
This function is ideal for cooking chicken (whole or in
pieces). Place the food inside the oven while it is still cold.
The dish may also be placed in a preheated oven.
CAKES mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
Using the Small Space and Main Space at
the same time
! Simultaneous operation is only possible when using
CREATION cooking modes.
34
Starting the oven
For simultaneous use, simply start a cooking mode for both
cavities in succession.
The TEMPERATURE display shows the cooking parameters
for both cavities.
! Thanks to the high energy efficiency of the appliance, it
only takes around 15 minutes for the SMALL SPACE cavity
to preheat.

Programming cooking

! A cooking mode must be selected before programming
can take place. Cooking can also be programmed for the
various cavities.
! Once a cooking mode has been selected, the
is activated; it will then be possible to program a duration.
The
button is only activated after a duration has been
set; it will then be possible to program a delayed start.
Programming the duration
1. Press the
button; the
the TIME display will flash.
2. Set the duration by pressing buttons
3. Once you have reached the desired duration, press the
button again.
4. Press the
button to begin cooking.
5. When cooking has finished, "END" appears on the
TEMPERATURE display and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Programming delayed cooking
! A cooking duration must be set before the cooking end
time can be scheduled.
! For the delayed programming to work properly, the clock
should be set to the correct time.
1. Press the
button and repeat steps 1 to 3 as described
for the duration setting.
2. Then press the
button and set the end time using
the
and
buttons.
3. Once you have reached the desired end time, press the
button again.
4. Press the
button to activate the programmed mode.
The
and
buttons will flash alternately to indicate that
programming has taken place; in the time before cooking
starts, the TIME display will show the duration and the
cooking end time alternately.
5. Once cooking has finished, "END" appears on the
TEMPERATURE display and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed, while the end time is set to 12:30.
The programme will start automatically at 11:15 a.m.
To cancel programming press the
button
button and the numbers on
and .
button.

Publicité

Table des Matières
loading

Table des Matières