Télécharger Imprimer la page

GreenWorks HTC402 Manuel D'opérateur page 10

Publicité

EN
12
TROUBLESHOOTING
Problem
The motor does
not start when
you pull the trig-
ger.
The machine
smokes during
operation.
The motor is on,
blades do not
move.
There is too
much noise
and/or vibration
during opera-
tion.
13
TECHNICAL DATA
Voltage
No load speed
Blade length
Possible cause Solution
Make sure that
The battery
you tighlty in-
pack is not in-
stall the battery
stalled tightly.
pack in the ma-
chine.
The battery
Charge the bat-
pack is out of
tery pack.
power.
1.
Immedi-
ately stop
the ma-
chine.
The machine
2.
Remove
has damage.
the battery
pack.
3.
Speak to
service
center.
Do not use the
The machine
machine and
has damage.
speak to service
center.
Remove battery
The blades are
pack then clear
blocked.
blockage from
the blades.
1.
Stop the
machine.
2.
Remove
the battery.
3.
Inspect for
Loose parts.
damage.
4.
Check and
tighten
loose
parts.
Do not use the
machine and
Damaged parts.
speak to service
center.
60V
3200 (±10%) SPM
26" (66 cm)
English
Cutting capacity
Battery model
Charger model
14
LIMITED WARRANTY
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of four (4) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion
will repair or replace any and all parts found to be
defective, through normal use, free of charge to the
customer. This warranty is valid only for units which
have been used for personal use that have not been
hired or rented for industrial/commercial use, and
that have been maintained in accordance with the
instructions in the operator manual supplied with the
product from new.
ITEMS NOT COVERED BY WARRANTY:
1.
Any part that has become inoperative due
to misuse, commercial use, abuse, neglect,
accident, improper maintenance, or alteration; or
2.
The unit, if it has not been operated and/or
maintained in accordance with the operator
manual; or
3.
Normal wear;
4.
Routine maintenance items such as lubricants,
blade sharpening;
5.
Normal deterioration of the exterior finish due to
use or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
10
1.1" (28 mm)
2948702, 2906402CT,
LB602, LB6025, LB603,
LB604, LB605, LB606
and other BAC series
2936902, CAC801,
CH60DP01, 60DPC10A,
CH60R00 and other CAC
series
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS

Publicité

loading

Ce manuel est également adapté pour:

Ht60l211Ht60l01