Risk of damage of the product
Only use the specified type of battery/rechargeable battery!
Insert batteries/rechargeable batteries according to polarity marks (+) and (–) on
the battery/rechargeable battery and the product.
Clean the contacts on the battery/rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries/rechargeable batteries from the product immediately.
Before initial use/Inserting and replacing
a battery
Turn the product over. Place the product on a soft underlay to avoid scratching the
surface.
Hold the front side of the product in one hand and the back cover
other hand. Turn the back cover in a counter-clockwise direction until the mounting
hole
is matching the arrow on the front side (fig. C).
1 ]
[
Remove the back cover
the battery into the battery compartment
pushing down at the + contact.
Close the battery compartment cover
Insert the back cover
hole
on the back cover.
1 ]
[
Note: Pay attention to the correct seating of the sealing ring, otherwise the IP
protection is not guaranteed.
Turn the back cover
mounting hole
The product is now ready for use.
28 GB/IE
. Remove the battery compartment cover
[
3 ]
with the arrow of the front side matching the mounting
[
3 ]
in a clockwise direction until it matches the
3 ]
[
on the top.
1 ]
[
, placing first the – contact and then
[
]
.
9 ]
[
with the
3 ]
[
and insert
9 ]
[