Publicité
with a cone with two 'ridges' that is fitted into the glove; the glo
through the sleeve and snap into the cuff, allowing for quick an
Fitting Gloves
Mise en place des gants dans les manchettes souples en caoutchouc à emboîtement, en option
Description
A liquid-tight cuff system for reusable jackets and coveralls that is
different glove thicknesses. The cuff system incorporates a flexible
with a cone with two 'ridges' that is fitted into the glove; the glove
through the sleeve and snap into the cuff, allowing for quick and ea
Insérez complètement le cône rouge à l'intérieur du gant jusqu'à ce
Fitting Gloves
Fully insert the red cone inside the glove until it is a
qu'il soit bien ajusté.
tight fit.
Fully insert the red cone inside the glove until it is a
Veillez à ce que le matériau du gant à l'extérieur du cône soit lisse et
Ensure the glove material on the outside of the cone is
tight fit.
sans plis et à ce qu'il n'y ait pas de lettres, de logos ou de motifs en
smooth and free from creases and it avoids any raised
relief sur le gant.
lettering, logos or patterns on the glove.
3
Insert the glove into the sleeve, checking the orientation
on the glove as you go. Once the glove is loosely in
place, from outside the sleeve push the back of the
cone against the front of the rubber cuff until the glove is
secured firmly.
Insérez le gant dans le manchon, en vérifiant l'orientation du gant au fur et
Insert the glove into the sleeve, checking the orientation
à mesure. Une fois que le gant est bien en place, poussez l'arrière du cône
on the glove as you go. Once the glove is loosely in
contre l'avant de la manchette en caoutchouc depuis l'extérieur du manchon
Ensure the first ridge of the cone is pushed through the
place, from outside the sleeve push the back of the
jusqu'à ce que le gant soit fermement fixé.
cuff, to create a liquid tight seal
cone against the front of the rubber cuff until the glove is
secured firmly.
PUSH-FIT GLOVE - PAGE 1
: www.respirex.com : +44 (0)1737 778600
1
1
2
3
4
Ensure the glove m
smooth and free fro
lettering, logos or p
PUSH-FIT GLOVE - PAGE 1
: www.respirex.com : +44 (0)1737 778600
Ensure the first ridg
cuff, to create a liqu
PUSH-FIT GLOVE - PAGE 1
: www.respirex.com : +44 (0)1737 778600
2
Ensure the glov
smooth and fre
2
lettering, logos
4
4
Ensure the first
cuff, to create a
11
Publicité
