Publicité
14
www.electrolux.com
10.5 Activating the appliance
Press and hold for a couple of seconds
the
button to activate or deactivate
the appliance.
A tune sounds when the appliance is
activated. The appliance performs a start
up animation. The animation quickly
shows each washing programme and the
default temperature and spin settings.
The display shows the word On.
10.6 Setting a programme
1. Touch the programme button
set the programme:
• The indicator of the button
flashes.
• The display shows the
programme duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message
10.7 Starting a programme
without the Finish In option
Touch the button
• The indicator of the button
stops to flash and stays on.
• The programme starts, the door
locks, the indicator
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
.
.
automatically the
programme duration
agree with the laundry
load.
new value.
10.8 Starting a programme with
the Finish In option
1. Touch the button
to choose the number of hours in
which you want the washing cycle to
be finished.
The display shows the number of hours
you set (e.g.
the button
option is active.
2. Touch the button
• The door is locked.
and
• The appliance starts the
• When the countdown is
To cancel the the Finish In option:
a. Touch the button
b. Touch the button
is on.
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Touch
The indicator of this button flashes.
2. Change the options. If you change
any option the Finish In option (if set)
will be disabled.
3. Touch
The programme continues.
again and again
) and the indicator above
is on to show that his
:
countdown.
completed, the programme starts
automatically.
You can cancel or change
the set of the Finish In option
before you touch the button
. After touching the
button
you can only
cancel the Finish In option.
appliance to pause. The indicator
of button
flashes.
indicator above this button goes
off.
Touch the button
start the programme
immediately.
.
again.
to set the
until the
again to
Publicité
