Connect Charging Converter - Dometic PERFECTPOWER DCC1224-10 Instructions De Montage Et De Service

Connect charging converter

8.3 Charging converter
A
NOTICE!
Before drilling any holes, make sure that no electrical cables or other
parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Pay attention to the distance specifications (fig. 2, page 4).
➤ Mount the charging converter as shown (fig. 3, page 4).
9 Connect charging converter
!
WARNING!
Do not reverse the polarity. Reverse polarity of the battery connections
can cause injury and damage the device.
!
CAUTION!
• Avoid coming into contact with the battery fluid under any
circumstances.
• Batteries with a cell short circuit may not be charged as explosive
gases may form due to overheating of the battery.
A
NOTICE!
Tighten the nuts and bolts with a maximum torque of 12 – 13 Nm. Loose
connections may cause overheating.
Observe the following instructions when connecting the battery:
• Make sure the battery poles are clean when connecting the terminals.
• Make sure the plug connector is fitted securely.
• Select a sufficient cross-section for the connection cable.
• Lay the cables in accordance with VDE 100 (Germany).
• Connect the negative cable directly to the negative terminal of the battery, and
not to the chassis of a vehicle or boat.
• Use the following cable colors:
– Red: positive connection
– Black: negative connection
18
PerfectCharge
EN