Dometic PERFECTPOWER DCC1224-10 Instructions De Montage Et De Service page 11

PerfectCharge
• Do not lay the cables so that they are loose or heavily kinked.
• Firmly secure the cables.
• Do not pull on the cables.
2.4 Safety when operating the product
!
WARNING!
• If the product is used in facilities with open lead acid batteries, the
room must be well ventilated. These batteries give off explosive
hydrogen gas that can be ignited by sparks on electrical connections.
!
CAUTION!
• Do not operate the product
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
• Before activating, ensure that the power supply line and plug are dry.
• Always disconnect the power supply when working on the product.
• Please be aware that parts of the product may still produce voltage
even after activation of the safety guard (fuse).
• Do not disconnect any cables when the product is still in use.
A
NOTICE!
• Make sure the air inlets and outlets of the product are not covered.
• Ensure good ventilation.
2.5 Safety precautions when handling batteries
!
WARNING!
• Batteries may contain aggressive and corrosive acids. Avoid battery
fluid coming into contact with your body. If your skin does come into
contact with battery fluid, thoroughly wash the part of your body in
question with water.
If you sustain any injuries from acids, contact a doctor immediately.
EN
General safety instructions
11