Télécharger Imprimer la page

Bosch 0 601 9K5 002 Notice Originale page 22

Publicité

22 | Français
Clean the jaws (see figures E1−E3)
– Remove the cover sleeve (2) from the power tool by turn-
ing it anticlockwise.
– Use a wrench (16 mm) to provide resistance on the
joint (22) and loosen the jaw sleeve (21).
– Remove the jaw sleeve (21).
This allows access to the jaws (23) and pressure
spring (24).
– Clean the jaws (23) and pressure spring (24) to remove
dust and metal splinters.
– If necessary, replace the jaws (23).
– Reassemble all components in reverse order.
Replacing the Built-in Coin Cell
®
The Bluetooth
Low Energy Module is fitted with a coin cell.
You will be notified via the Bosch Toolbox app if the coin cell
is too weak or if it is drained. The coin cell replacement must
be performed by Bosch or by an after-sales service centre
authorised to work with Bosch power tools.
Caution: The coin cell must always be replaced with a
u
coin cell of the same type. There is a risk of explosion.
Remove and dispose of drained coin cell correctly.
u
Drained coin cell may leak and damage the product or
cause personal injury.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
1 609 92A 7R1 | (22.06.2022)
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EU countries:
According to the Directive 2012/19/EU on waste electrical
and electronic equipment and its transposition into national
law, power tools that are no longer usable, and, according to
the Directive 2006/66/EC, defective or drained batteries
must be collected separately and disposed of in an environ-
mentally correct manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment
Regulations 2013 (SI 2013/3113) (as amended) and the
Waste Batteries and Accumulators Regulations 2009 (SI
2009/890) (as amended), products that are no longer us-
able must be collected separately and disposed of in an en-
vironmentally friendly manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 22).
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l'outil
électrique
Lire tous les avertissements de sé-
AVERTISSE-
curité, les instructions, les illustra-
MENT
tions et les spécifications fournis
Bosch Power Tools

Publicité

loading

Ce manuel est également adapté pour:

3 601 jk5Grg 18v-16 c professional