Publicité
Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate from the steps described
in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in the product overview
section
This symbol is intended to draw special attention to certain points when handling the product.
Product-dependent symbols
Symbols on the product
The following symbols can be used additionally on the product:
Wear eye protection
Wear ear protection
Wear protective gloves
Wear light respiratory protection
Protection class II (double-insulated)
Diameter
Revolutions per minute
Revolutions per minute
Product information
Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This
personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can present hazards if used
incorrectly by untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶
Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local
Hilti organization to inquire about the product.
Product information
Random orbital sander
Generation
Serial no.
Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives and standards. A copy of the
declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
*2301586*
2301586
DWS 225
01
8
Publicité
