Publicité
CONTROL PANEL
CONTROL FUNCTIONS
BUTTON
Selects weighing units: pounds or kilograms.
Toggles between gross weight and net weight.
Display shift is only available after using tare/pretare
functions.
Adds the value to the accumulation memory. Zero
display and press this key to show current total value.
M+
Print
Prints prints weight data on piece of paper.
Allows user to manually key in TARE value.
Deducts the container weight from pieces weight.
Zeros display for next weight.
Turns the power on/off.
PAGE 3 OF 35
OVERVIEW OF CONTROLS
1-800-295-5510
Max. 5,000 lbs.
uline.com
STABLE
GROSS
M+
Print
1
2
3
4
5
PRIMARY FUNCTION
UNIT (U)
GROSS/NET WEIGHT
ACCUMULATE (M+)
PRINT
PRETARE
TARE
ZERO
ON/OFF
6
7
Acts as an escape key to return the scale to normal
operating mode.
Acts as a clear key to reset parameters or other
functions.
Spaces left to change different numbers on the
display. Also used to set parameters or other
functions.
Spaces right to change different numbers on the
display. Also used to set parameters of other functions.
Changes number to set parameters and other
functions.
Enter key to set parameters and other functions.
CONTROL PANEL BUTTONS
#
DESCRIPTION
1
Unit Button
2
Gross/Net Weight Button
3
Accumulate Button
4
Pretare Button
5
Tare Button
6
Zero Button
7
ON/OFF Button
SECONDARY FUNCTION
ESC
CLEAR
SPACES LEFT
SPACES RIGHT
CHANGE NUMBER
ENTER
------------
0924 IH-4564
Publicité
