Publicité
5
Changing the peeler blade
Attention! The blade is very sharp! Handling the spare blades involves a high risk of
injury. Always wear cut-proof gloves as soon as you handle the peeling blades!
Loosening the screw and taking off the peeling blade.
Loosen and take out the hexagon socket head screw (Torx), that holds the blade in place,
using the supplied key, then turn the blade 180 degrees (reversible blade).
Installing the peeling blade
Make sure that the scraper blade rests flat on the surface and that it touches the stop on the
side of the scraper arm before screwing it tight.
Only genuine spare blades from ROTHENBERGER Werkzeuge GmbH are compatible
with the tool!
6
Care and Maintenance
To achieve an optimum work results the tool has to be handled with care and maintained fre-
quently. Pollution has to be avoided or, if necessary, removed with a soft cloth or a Q-tip.
7
Accessories
You can find suitable accessories in the main catalog or at www.rothenberger.com
8
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: + 49 (0) 61 95/ 800 8200 sf + 49 (0) 61 95/ 800 7491 service@rothenberger.com -
www.rothenberger.com
9
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
16
www.rothenberger.com
ENGLISH
Publicité
