Télécharger Imprimer la page

Ryobi RY36STX56A-250 Mode D'emploi page 6

Publicité

Check all nuts, bolts, and screws at frequent intervals for
proper tightness to ensure that the product is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
Run the product a few times after throwing snow to
prevent freeze-up of the impeller.
You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
After each use, clean the plastic parts with a soft, dry cloth.
KNOW YOUR PRODUCT
See pages 160–161.
1. Wrench
2. Bolts and nuts
3. Chute deflector
4. Chute
5. Shear pins
6. Skid plate
7. Battery cover
8. Battery pack
9. Charger
10. Self-propel paddle
11. Chute deflector lever
12. Drive speed lever
13. Handle
14. Auger speed lever
15. Start button
16. Auger paddle
17. Single-hand operation LED
18. Chute rotation lever
19. Handle lock clip
20. Snow brush/chute cleaner
21. Headlight
22. Operator's manual
23. Tyre
24. Auger
25. Scraper
26. Upper handle
SINGLE-HAND OPERATION MODE
When the auger paddle is released, the single-hand
operation mode is engaged. The single-hand operation LED
light illuminates. This frees one hand to adjust the speed and
direction of the product. All functions will remain active with
just the self-propel handle depressed. Once all adjustments
are made, return to two-handed operation for safety.
SYMBOLS
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Wear eye protection.
6
Do not expose the product to rain or damp
conditions.
Avoid injury from the rotating impeller.
Keep hands, feet, and clothing away.
Keep all bystanders, especially children
15M
and pets, at least 15 m away from the
operating area.
Do not operate the product on slopes.
Keep hands and feet away from the front
of the machine and the discharge chute of
the product.
Beware of electric shock hazard.
Remove the battery pack before starting
any work on the product.
Keep hands and feet away from the front
of the product and the discharge chute.
Guaranteed sound power level
Storage battery compartment
MAX
MAX
Maximum run time / Maximum throw
Do not dispose of waste batteries, waste
electrical and electronic equipment
as unsorted municipal waste. Waste
batteries and waste electrical and
electronic equipment must be collected
separately. Waste batteries, waste
accumulators, and light sources have to
be removed from the equipment. Check
with your local authority or retailer for
recycling advice and collection point.
According to local regulations, retailers
may have an obligation to take back
waste batteries and waste electrical and
electronic equipment free of charge. Your
contribution to the reuse and recycling of
waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials. Waste batteries,
in particular containing lithium, and waste
electrical and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment
and the human health if not disposed
of in an environmentally compatible
manner. Delete personal data from waste
equipment, if any.

Publicité

loading

Ce manuel est également adapté pour:

Ry36stx56a