Publicité
■
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
■
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
■
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
■
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
■
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
CORDLESS SNOW THROWER SAFETY
WARNINGS
TRAINING
■
Read, understand, and follow all instructions on the
product and in this manual before operating the product.
Be thoroughly familiar with the controls and the proper
use of the product. Know how to turn off the product and
quickly disengage the controls.
■
Never allow children or people with reduced physical,
sensory, or mental capabilities, or people who are
unfamiliar with these instructions, to operate, clean, or
maintain the product. Local regulations may restrict the age
of the operator. Children should be adequately supervised
to ensure that they do not play with the product.
■
Keep bystanders, children, and pets 15 m away from the
area of operation. Turn off the product if anyone enters
the area.
■
Exercise caution to avoid slipping or falling, especially
when operating the product in reverse.
■
Adjust the collector housing height to clear gravel or
crushed rock surface.
4
■
Never attempt to make any adjustments while the
product is running.
■
The product is capable of amputating hands and feet,
and throwing objects. Failure to observe all safety
instructions could result in serious injury.
■
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
■
Thoroughly inspect the area where the product is to be
used, and remove all doormats, sleds, boards, wires,
and other foreign objects.
■
Disengage all clutches and shift into neutral before
starting the motor.
■
While operating the product, always wear adequate
winter garments and non-skid safety footwear. Avoid
wearing clothing that is loose-fitting or that has hanging
cords or ties; they can be caught in moving parts.
■
Secure long hair so that it is above shoulder level to
prevent entanglement in moving parts.
■
Always wear safety glasses or eye shields during
operation or while performing an adjustment or repair
to protect eyes from foreign objects that may be thrown
from the product.
■
Before each use, ensure that all controls and safety
devices function correctly. Do not use the product if the
off switch does not turn off the product.
■
Before each use, always check that the housing is
undamaged and that guards and handles are in place
and properly secured.
OPERATION
■
Hold the product by insulated gripping surfaces only,
because the auger may contact hidden wiring. Augers
contacting a "live" wire may make exposed metal parts
of the product "live" and could give the operator an
electric shock.
■
Do not use the product when there is a risk of lightning.
■
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times. Do not
put any objects into openings.
■
Exercise extreme caution when operating on or crossing
gravel drives or walks. Stay alert for hidden hazards or
when operating near public roads.
■
To reduce the risk of injury associated with contacting
moving parts, always turn off the product and remove
the battery pack. Make sure that all moving parts have
come to a complete stop:
●
after striking a foreign object to inspect the product
for damage
●
before cleaning or clearing a blockage
●
before leaving the product unattended
●
before
checking,
conducting
working on the product
●
if the product starts to vibrate abnormally (check
immediately). Vibration is generally a warning of trouble.
■
Use the product across the face of slopes, never up
and down. Exercise extreme caution when changing
direction on slopes. Do not attempt to clear steep slopes.
■
Never operate the product without proper guards, plates,
or other safety protective devices in place.
■
Never direct the discharge towards people or areas
where property damage can occur. Keep children and
pets away.
maintenance,
or
Publicité
