Publicité
OP 2030
The pictograms are integral part of the product.
In case of loss, deterioration or illegibility,
require the pictograms to the constructor in
order to substitute them immediately. Replace the
pictograms always in the same place where they
were removed following the above design.
The machine weights 65kg. It is necessary to use a trolley for handling and carriage.
Fix the package at the trolley through straps in order to balance it.
Handle with care in order to avoid to upset and to make the package of 650x400x1400mm falling, causing
danger both for the person responsible of the handling and for the staff near the spot.
The machine is packed in a cardboard box of 650x400x1400 mm and closed by metal clips.
On the package there are arrows indicating how to handle the box.
Lay down the package in order to unpack the machine.
Remove the metal clips carefully on the top of the box and unpack the machine slipping it out of the package.
Inside the box there are components and accessories of the machine. Pay attention, not throw them with the
package. It is recommended not to leave packaging parts to the range of children. Throw the package in
appropriate spots.
The machine OP 2030 can be placed in every place, where it can be connected to the compressed air system.
Do not use the machine in case of lightning lower than 600 lux.
The machine can be moved easily because it is not xed at the oor.
PNEUMATIC COMPRESSOR CERTIFIED VERITAS
CARRIAGE
Publicité
