Publicité
OP 2030
DESCRIPTION
The machine for assembling and disassembling shock absorbers is made up of a painted metal tubular frame.
On this structure is mounted a pneumatic piston xed at the frame, its extension and compression allows the
compression and the release of the spring held by control brackets.
The machine OP 2030 is a device for assembling and dissasembling the shock absorbers of the cars.
Every different use is considered improper and illogical.
The manufacturer does not assume responsibility for possible damage caused by non-compliance with instructions.
CHARACTERISTICS
Air pressure: Mini. 6 bars, Maxi. 10 bars
Power: 735Kg (6 atm)
1.226Kg (10 atm)
Cylinder stroke: 420mm
Dimensions: 139x45x47cm (monté)
Machine weight: 40,3kg
Small clamp: Ø78 à130mm (Poids 3,6kg)
Big clamp: Ø125 à 205mm (Poids 4,2kg)
The usage of this machine model OP 2030 required a particular attention. Compressed springs can be potential
dangers due to force collected because of compression. This machine must be used always with its speci c frontal
protection mounted correctly on the frame.
Here under listed the individual protection measures necessary to work with our product.
The machine is equipped with pictograms that show remaining risks and individual protection measures to be used
during working operations.
Danger pictogramms
Accident prevention gloves
Anti prevention shoes
Protection glasses
Instructions manual
PNEUMATIC COMPRESSOR CERTIFIED VERITAS
WARNING
Publicité
