Publicité
OP 2030
Assembling
Connect the machine to the air compressed system.
Control that the air pressure is between 5 and 6 bar. If the
pressure supplied is higher, reduce it with proper device
(for example with a pressure reducer).
1. Assemble left and right
stands (réf. A et B) using
the
hexagonal wrench 6mm.
2. Assemble the clamps (réf. C) on
their seat on the upper stands using the
provided screws and hexagonal wrench
6mm.
3. Screw the handles M8
(réf. D) to the bushes of the
upper stands.
PNEUMATIC COMPRESSOR CERTIFIED VERITAS
USE
provided
screws
and
E
C
A
B
4. Assemble the protection
cage (réf. E) inserting the pipes
in the holding brackets, then
x them with the 4 provided
screws.
E
D
C
A
Publicité
