Publicité
Function and device overview
Do not connect devices to the
Switching and Measuring Cable
that could cause fire or other types
of damage if left unattended (e.g.
irons).
Always remove the plug of the
connected device from the Swit-
ching and Measuring Cable before
making modifications to the de-
vice.
Always lay cables in such a way
that they do not become a risk to
people and domestic animals.
The device has not been designed to
support safety disconnection. The
load is not isolated from the mains.
Voltage-free only when the plug is
pulled out!
Only use the device with properly
installed wall outlets with earth
contacts and not with multiple
socket outlets or extension leads.
Using the device for any purpose
other than that described in this
operating manual does not fall
within the scope of intended use
and will invalidate any warranty or
liability.
Devices with electronic power
supply units (e.g. TV or high volta-
ge LED light sources) are not
ohmic loads. They can generate
inrush currents of more than 100
A. Switching such kinds of load
may lead to premature wear of the
actuator.
3 Function and device
overview
With the Homematic IP Switching and
Measuring Cable – outdoor you can
comfortably switch connected loads
on and off and meter the energy con-
sumption as well as the voltage, current
and power of the connected devices.
The energy consumption of connec-
ted loads and the corresponding ener-
gy costs can be determined using the
Homematic IP app.
The Switching and Measuring Cable can
be connected quickly and without any
tools. Simply plug it into a socket and it
is immediately ready for use. The IP44
protection class makes it ideal for out-
door use.
The device can optionally be used as
router to extend the wireless range.
Device overview:
(A) System button
(B) Mains plug
(C) Connector
C
Figure 1
B
A
15
Publicité
