Publicité
TROUBLESHOOTING
In case of mini-function, please refer to the following table ;
| Problem
Possible causes
Solution
3 lamps
=
=
Ẹ power
The rolling bar is wrapped.
a
Ihe oling bar:
indicator
Temperature is too high or low.
r e
| flicker.
suitable temperature.
|
| Power
Ensure that no hair or other
|
a
thread is trapped around
| brush
Brush is trapped by hair or
the brush and'checkibrush
| does not
larger debris.
area for larger debris.
work,
Running
Battery needs to be replaced
Contact the shop or after
time
Ambient temperature is too high
| sales service to replace
shortened. | or too low.
| the battery fat the user's
Battery is no fully charged.
| own cost. Your vacuum
should only be operated
in suitable ambient
temperature.
The battery needs
charging.
| The
The dust cup is full.
Clean the dust cup
| vacuum
The filter is blocked.
| after use to prevent
has no
Suction inlet of brush or other
blocking.
suction
accessory is blocked.
Remove any dust or debris
power.
Parts of the appliance is not fully | from the filter. Check for
dried after cleaning.
blockages at brush and
other attachment points.
Ensure that all components
are properly dried after
washing.
Not
Ambient temperature when
Charge the machine under
charging
charging is too low or too high.
the right temperature
2
environment (5°C-40°C).
EN-15
Publicité
