Publicité
2.
Twist dust cup and remove. Twist filter screen and remove. Lift out foam
filter. Rinse and dry THOROUGHLY. Assemble after each part dried
completely
+
Tip: Above steps are suggested after each dustbin empty.
CAUTION
. To prevent injuries handle with care.
. Do not wash the mechanical part of the dust collector.
. Ensure each part dried completely before next usage.
. Do not scrub the filter or apply undue force.
. Ensure filter is correctly secured during assembly.
. Change filter if damaged or if cleaning does not return it to its pristine state.
DNAN
Power Brush Cleaning
Please clean the brush when the brush roller or the wheel is entangled by hair.
EN-13
Publicité
