Publicité
Logiciels de contrôle - « Graphite Editor » - 6.1.4 Affectation des commandes MIDI aux contrôleurs
In the "External Control and Automation" tab, under "Available Devices" choose
-
"Mackie Control" and click on Add.
Double-click in the "Status" field and in the dialog box that opens,
-
in the "Device Type" field choose "Emulated Mackie Control Device".
-
Select "MIDIIN5" (Samson Graphite 49) for the MIDI input if it is not already selected.
-
Click on OK,
-
then click on OK in the next dialog box.
The faders, rotaries, Bank, Track, and Transport buttons work as expected but only the 8
channels can be controlled and it is not possible to do "Bank" or "Track" shifting. Graphite 49's
upper switches control "Solo", and the lower switches control "Track Activator" buttons.
6.1.4.3.9 SONY "VEGAS PRO"
The procedure is identical to "Acid Pr"o, except that the "Status" field in the "External Control
and Automation" page updates correctly after selecting "Emulated Mackie Control Device"
instead of saying "No Mackie Devices Detected."
Note that only audio channels are controlled.
6.1.4.3.10 STEINBERG « CUBASE »
Go "Devices > Device Setup". Click the + sign in the upper left corner and select
-
"Mackie Control" from the pop-up menu.
-
Under MIDI Input, select MIDIIN5 (Samson Graphite 49) then click on Apply.
-
Click OK.
The faders, rotaries, and Transport buttons work as expected. Graphite 49's upper switches
control Solo, and the lower switches control Mute.
However, I couldn't figure out how to get "Cubase" to recognize Graphite 49's "Page" (Bank)
and "Channel buttons; if anyone knows, please add a comment, and I'll modify this article.
Cubase offers a very cool feature: If you check "Enable Auto Select", when you move a
Graphite 49 fader it automatically selects that "channel".
Samson GRAPHITE 49 - Aide-mémoire
Mai 2017
54/57
Publicité
