Publicité
Logiciels de contrôle - « Graphite Editor » - 6.1.4 Affectation des commandes MIDI aux contrôleurs
Mackie Control works somewhat differently with "Reason" from a conceptual standpoint,
because until Record was integrated with Reason in Version 6, Reason was not a traditional
DAW. As a result, Graphite sends out specific control signals that apply to whatever device
has the focus. It's easiest if you also use Graphite 49 as the master keyboard controller, and
go Options > Surface Locking and for Lock to Device, select Follow Master Keyboard. Also,
create a track for any device you want to control, including processors or devices like the Mixer
14:2. When you click on that track, Graphite 49 will control the associated device. If you choose
an Audio Track, slider S1 controls level, the F1 button controls solo, F9 controls mute, and
rotary E8 controls pan.
For example, if the 14:2 Mixer has the focus, the faders, rotaries, and buttons work as
expected. (as does the transport) although Bank and Channel Shift commands aren't
recognized. If SubTractor has the focus, the controls affect various SubTractor parameters.
There's a bit of trial and error involved with the various devices to find which Graphite 49
controls affect which parameters; you can always create custom presets to control specific
instruments, but this goes beyond the scope of this article, as it involves delving into Reason's
documentation and assigning specific controls to specific MIDI channels and controller
numbers.
Go Edit > Preferences and click the Control Surfaces tab. Click the Add button; select Mackie
as the manufacturer, and Control for the model. Under input, select MIDIIN5 (Samson Graphite
49). For output, select MIDIOUT2 (Samson Graphite 49). Click OK, and make sure Standard
is checked.
Note that you can also lock the Graphite 49 to a specific device so that it will control that device,
regardless of which track is selected. Go Options > Surface Locking and choose the device to
be locked.
6.1.4.3.8 6. SONY "ACID PRO"
Under "Options", check "External Control". - Under "Options > Preferences", click the
-
MIDI tab, check the "MIDIIN5" (Samson Graphite 49) box under "Make these devices
available for MIDI input," then click Apply.
Samson GRAPHITE 49 - Aide-mémoire
Mai 2017
53/57
Publicité
