Publicité
Logiciels de contrôle - « Graphite Editor » - 6.1.4 Affectation des commandes MIDI aux contrôleurs
6.1.4.3.4 CAKEWALK "SONAR"
In "Edit > Preferences > MIDI Devices", set the "MIDI In" port to "MIDIIN5" (Samson
-
Graphite 49) and the MIDI Out port to MIDIOUT2 (Samson Graphite 49).
Click Apply. - Click on "Control Surfaces" under MIDI, then click the "Add New
-
Controller" button in the upper right.
For "Controller/Surface", choose "Mackie Control" and verify that the Input and Output
-
Ports match your previous MIDI port selections. - Click OK, click Apply, click Close.
The faders, rotaries, Bank, Track, and Transport buttons work as expected. Graphite 49's
upper switches control Solo, and the lower switches control Mute.
6.1.4.3.5 MOTU "DIGITAL PERFORMER"
Go "Setup > Control Surface Setup". Click the + sign to add a driver, and select "Mackie
-
Control".
-
Under Input Port, choose Samson Graphite 49 Controller (channel 1). Click OK.
The faders, rotaries, and Transport buttons work as expected. Graphite 49's upper switches
control Solo, and the lower switches control Mute.
Samson GRAPHITE 49 - Aide-mémoire
Mai 2017
51/57
Publicité
