Publicité
This User Manual has been translated using machine translation. We have made every effort to ensure the translation
is accurate, but please note that automated translations are not perfect and are not meant to replace human
translators. The official version of the User Manual is in English. Any differences between the translated version and the
original English are not legally binding. If you have any questions about the accuracy of the translation, please refer to
the English version, which is the official reference. More language versions are available upon request via
info@expondo.com.
Technical data
Parameter
description
Product name
Model
Rated voltage [V~] / Frequency [Hz]
Rated power [W]
IEC Protection class
Protection rating IP
Insulating Grade
Cutting Capacity max. dia. [mm]
Cutting speed [sec]
Duty Cycle
Dimensions [Width x Depth x Height; mm]
Weight [kg]
Thank you for choosing our product!
Please read and understand this manual thoroughly before using the product. Only use this product after you have fully
comprehended its contents. If you encounter any difficulties or malfunctions, contact your dealer or the manufacturer for
assistance. To prevent loss of small parts or contamination of the hydraulic clamp system that could result in tool failure, do not
disassemble the tool yourself.
� WARNING: Failure to use or operate this tool according to the following instructions could result in serious personal injury.
�
�
Main safety precautions
� WARNING: When using a rechargeable electro-hydraulic cutting tool, adhere to the following safety measures to prevent
�
�
accidents such as fire, electric shock, or personal injury. Please read and understand these safety precautions before operating
the tool.
I. Workplace
1. Maintain a clean and well-lit workspace. Cluttered or dark areas can lead to accidents.
2. Keep children and bystanders at a safe distance from the tool during operation to avoid distractions and potential
accidents.
3. This tool is not electrically insulated. Do not use it with live wires or terminals.
4. Avoid operating or storing the tool in environments with strong acids, alkalis, other corrosive substances, or extreme
temperatures. Protect tools from corrosion and premature aging.
5. Do not charge or use the tool in an area with flammable or explosive liquids, gases, or dust.
II. Electrical safety
1. Ensure the charger and plug are compatible with the socket. Do not modify the plug.
2. Protect the charger, battery, and tool from rain or wet conditions. Water entering the electrical system increases the risk
of electric shock.
3. Do not misuse wires. Avoid using wires for carrying, pulling, or unplugging the charger. Damaged or twisted wires can
lead to electric shock.
4. If the charger experiences a strong impact, falls, or sustains any damage, do not use or attempt to repair it. Only
qualified maintenance personnel should handle repairs. Using a damaged charger can result in electric shock or fire.
5. Do not charge the battery if the ambient temperature is below 10°C or above 40°C. Ensure the cooling vents on the
charger and battery remain unblocked during charging.
6. During thunderstorms or lightning, unplug the charger power cord. Avoid short-circuiting or burning the battery, as this
could lead to an explosion.
III. Personal safety
1. Stay alert and attentive. Always be fully aware of the operations you are performing. Avoid using the tool when fatigued
or under the influence of medication, alcohol, or treatments that impair concentration. Distraction can lead to serious
personal injury.
EN
Parameter
value
Cable Cutter
MSW-EBCC-700V
100-230 / 50
120
II
IPX0
F
120
12-15
S1
700 x 220 x 500
14.5
Publicité
