Publicité
VI Troubleshooting
Fault phenomenon
A. The tool cannot start
B. No pressure output or failure to
reach
rated
pressure
operation
C. Oil leakage from the tool head or
plunger
D. Motor started, no pressure output
E. The tool rings continuously for 5
seconds
F. Blade curling
Cause analysis
1. The battery is dead.
2. Circuit problem.
3. Trace impurities in hydraulic oil.
1. Tools lack oil.
during
2. Trace impurities in pressure oil.
3. Internal leakage.
1. Damaged sealing components.
1. Tool is out of oil.
2. Trace impurities in hydraulic oil.
3. Internal leakage.
1. The battery is discharged.
1. Slight blade curling.
EN
Exclusion method
1. Charge the battery.
2.
manufacturer.
3. Replace the hydraulic oil.
1. Add or replace hydraulic oil.
2. Replace hydraulic oil.
3.
manufacturer
professionals.
1.
manufacturer for replacement by
professionals.
1. Add or replace hydraulic oil.
2.
manufacturer for maintenance.
3. Use in an environment between
10°C and 40°C.
1. Charge the battery immediately.
1. Use a diamond file or electric
grinder to repair the blade.
Contact
the
dealer
Contact
the
dealer
for
servicing
Contact
the
dealer
Contact
the
dealer
or
or
by
or
or
Publicité
