Maytronics MTC8-UNI Guide D'utilisation page 8

English
Reinstall the filters according to the diagram
DO NOT FORCE THE FILTERS INTO PLACE.
Important: Where applicable, you must reset the full filter bag indicator on the power supply unit.
Recommendation: Rinse all brushes with clean water after each cleaning cycle.
Part 2 - Dismantling and cleaning the impeller
Unplug power supply before any servicing activity.
Dismantle the impeller cover and
clean around the impeller housing,
then reassemble.
1
Section 4 – Storage Advice
Coil the cable and store in dry cool area – Preferably on the Caddy if available.
Do NOT store the robot pool cleaner exposed to direct sunlight.
Do NOT store the robot pool cleaner exposed to excessive heat.
Do NOT store the robot pool cleaner exposed to frost.
Grooved end fitting
2
Octagonal end fitting
3
6