Publicité
2. Make sure the saw blade rotates in the direction of the arrow on the blade.
Switching on and off
For safety reasons the on/off switch (8) of your tool is equipped with a safety button (9).
1. Press the safety button to unlock the tool.
2. To run the tool, press the on/off switch (8). As soon as the on/off switch is released the safety switch
is automatically activated to prevent unintended starting of the machine. Do not switch the tool on or
off when the saw blade touches the workpiece or other materials. Do not operate the spindle lock
while the tool is running.
Holding and guiding the tool
1. Hold the tool by the main grip and the front handle (1) to guide the saw properly.
2. For optimum results, clamp the workpiece bottom up.
3. Follow the line drawn on the workpiece using the mark.
4. In case of a bevel angle of 45 degree follow the line drawn on the workpiece using the mark.
5. Lead the cord away in line with the rear of the tool.
3.4.
Cleaning and maintenance
a)
Unplug the mains plug and allow the device to cool completely before each cleaning, adjustment or
replacement of accessories, or if the device is not being used.
•
Wait for the rotating elements to stop.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
Do not allow water to get inside the device through vents in the housing of the device.
g)
Clean the vents with a brush and compressed air.
h)
The device must be regularly inspected to check its technical efficiency and spot any damage.
i)
Use a soft cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
k)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Publicité
