Publicité
11. WARNING: During use, do not place or leave
appliance where it may be (1) damaged by an
animal or (2) exposed to the weather.
12. Oil blades frequently. Blades may become hot
during use. Check often to prevent burning
animal.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
Plug the cord into an electrical outlet, operate at 230 volt, 50 cycle AC electrical
current or as noted on the unit. To start the clipper move the switch button to the
"on" position. To stop, move the switch button back to the original position. After
using your Andis clipper, rewrap the cord and store in a safe place.
Before starting clipper remove blade guard. Plug cord into electrical outlet, operate
at 120 volt, 60 cycle AC electrical current or as noted on the unit. To start clipper
move switch button to "ON" position, to stop, move switch button back to original
position. After using your Andis clipper, rewrap cord and store in a safe place.
CLIPPER BLADE ADJUSTMENT
Your Andis adjustable clipper blade set is easy to adjust. From short to longer cuts,
all that is needed is a flick of the adjustment lever with your thumb. In the upright
position, the blades are set for the shortest cuts (Figure C).
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made
for your Andis clipper. The combs mount easily; simply slip the cutter blade teeth into
comb and snap the comb down (Figures A & B). To remove, simply snap off. These
attachment combs guide hair into the blades and give you precise control of hair
lengths. The length of trim is indicated on the attachment comb. Use the chart to
find the approximate lengths of cut. Different blade angles in relation to the skin,
thickness and texture of the hair will vary the cutting length.
4
Publicité
