Publicité
The desired relative humidity level can be set between
40% and 90% with increments of 5%. When you go
below 40% or above 90%, the display will show
and
Auto mode will be deactivated. The following
sequence shows the steps and how they cycle.
> 40% > 45% > 50% > [...] > 90% >
Timer
Press the
button until the
on the display. Use the
increase or decrease the timer hours in the following
sequence: 1h > 2h > 4h > 8h > OFF.
Once the timer is activated, the device will
automatically shut down after the set timer has been
completed.
Display brightness
The display will automatically dim after the last touch
or press.
Refill water indicator
When the water level becomes too low to produce
mist, the device will make three "beep"-sounds
and the display will show the red
combination with an E1 notification. Please follow the
steps explained in Filling the water tank. When the
water tank is refilled you may plug in the power cord
and turn on the device.
>40%
indicator illuminates
and
buttons to
indicator in
Display notifications
The following notification may show on the display:
•
E1: The water level in the mist chamber
low to produce mist.
•
E2: The water tank
humidifier base
.
•
E3: If this notification shows, please contact your
nearest service provider.
is too
is not placed on the
11
Publicité
