Publicité
Mode button
Use the
button to active/deactivate the auto mode
or set a timer.
Press the
button to cycle through the modes:
Auto mode and
The selected mode icon will illuminate on the display.
Use the
and
confirm the changes, wait for ± 3 seconds or press
the
button again.
Note: If the display shows
mode won't activate or will be deactivated after
confirmation.
For more information on functions, see
Functions.
/
Increase/decrease button
The behaviour of the increase / decrease buttons
depends on the mode that is being set.
•
Manual mode: Increase or decrease mist output
level.
•
Auto mode: Increase or decrease the desired
relative humidity level.
•
Timer mode: Increase or decrease the timer
with 1 hour increments.
10
Timer mode.
buttons to change the setting. To
, the chosen
chapter
Functions
Manual mode
In Manual mode users can select the desired mist
output.
Use the
and
buttons to select the desired
mist output. The mist output level bars will change
accordingly. There are three mist output levels:
Low
Medium
High
Auto mode
In
Auto mode users can set the built-in hygrostat
to their desired relative humidity level. If the ambient
relative humidity drops below the desired level, the
mist output will automatically turn on. It will continue
to operate in the chosen mist output level until the
hygrostat level is reached.
Before turning on
Auto mode, select the desired
mist output level in Manual mode using the
buttons. Press the
illuminates on the display. Press the
buttons to set the hygrostat to the desired relative
humidity level.
Note: The mist output level can't be changed when
the
mode is active.
and
button until the
indicator
and
Publicité
