Setting The Print Head Gap - Dascom LA550 Matrix Guide De Démarrage

Quick Start-en.book Seite 26 Dienstag, 22. Juni 2004 1:33 13
Settings

Setting the print head gap

Adjust Paprpath
Online
Menu Char
1 2 3 4
Setup
TOF
Head Tear Online
1 2 3 4
Setup
Head= 0 *
Set < > Exit Online
1 2 3 4
Setup
26
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
The printer features automatic print head gap adjustment to the thickness of the pa-
per used. In setup mode, you can enter a correction value to modify the head gap
that is normally determined automatically. This correction is useful for modifying
the appearance of the type face. This correction will modify the appearance of the
font. It may be necessary to obtain optimum printing results on certain paper types.
The AGA (automatic gap adjustment) function must be set to "always" or "once".
For more detailed information, refer to the User guide on the Online CD-ROM.
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the Head (1) key.
Use the < (2) or > (3) key to set the range within which the automatic gap adjust-
ment is to be corrected. You can select values in the range from -10 to +10. Values
from 0 to -10 reduce the distance between the print head and the paper, positive
values increase the distance.
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Negative values decrease the print head gap, positive values increase it. Changing
the automatically determined value may have a strong effect on the printing qual-
ity. The setting made will be retained after switching off the printer.
Quick start guide