Télécharger Imprimer la page

Domo DO91934 Mode D'emploi page 58

Publicité

Take the upper hinge, remove the hinge pin, turn the hinge cover around and refit the hinge pin.
11.
12. There is a cover at the top of the refrigerator (1) over the screw holes on the left side. Remove this
and place it on the right side (2).
13.
Place the upper door on the centre hinge. Install the upper hinge (1) and secure with the screws (2).
The accessory bag contains a hinge cover (3), place this over the hinge at the top of the appliance.
Push the cover from left to right first, and then down.
USE
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside the appliance.
Adjust the control knob as desired to suit your individual preference. The higher the number, the colder
the temperature. Position 4 is the recommended position for normal use.
Depending on the ambient temperature and the contents used, we recommend changing the setting to
5 or 6 (for more cooling) or setting 2 or 3 (if too cold). We recommend waiting one day after adjusting the
temperature to be able to correctly assess it.
In the 0 position the appliance does not operate (the cooling system is switched off), but power supply
·
is not interrupted.
The running time and temperature are affected by where the fridge is located, how often the door is
·
opened and the temperature of the room the fridge is located in.
58
DO91934
1
2
3
2
1

Publicité

loading