Publicité
DOOR CONVERSION
If you need to hinge your door on the opposite side, it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 12 hours
before switching it on. This allows the coolant to set.
1.
Remove the hinge cover (1) from the upper hinge (right). Remove the screws (2) and hinge cover
(3). You can put the cover (1) in a safe place because you will not need it again. As the screws are
loosened, the door will become loose, so make sure you are holding it while removing them.
2.
Remove the upper door and place it on a soft surface to avoid scratching.
3.
Remove the lower screws (1) of the upper door. Move the hinge cover (2) from right to left and
reattach with the screws.
4.
Loosen the screws (1) on the middle hinge. Remove the hinge cover (2). Remove the lower door and
place it on a soft surface to avoid scratching.
5.
Remove the lower screws (1) of the lower door. Move the hinge cover (2) from right to left and
reattach with the screws.
56
DO91934
1
2
3
2
1
2
1
2
1
Publicité
