Publicité
English
Labels
1
90082 Rev. I - 1
guardianfall.com
Concrete Anchor Strap
ANSI/ASSP Z359.18-2017, OSHA 1910.140 & 1926.502
WARNING
Prior to use, read and understand all instructions pro-
vided by manufacturer at time of shipment for proper
use, inspection maintenance, and inspection. Alteration,
abuse or misuse of this product may result in serious
injury or death.
Avoid contact with hazards, including, but not limited to,
heat, chemicals, electricity, and sharp or abrasive edges
and surfaces. NEVER make incompatible connections.
PFAS equipment must be selected and deemed
compatible with Concrete Anchor Strap by a
Competent Person.
Type A Anchorage Connector
User Weight Range (including tools and equipment):
100-420 lb (45-191 kg)
Minimum Breaking Strength (MBS): 5,000 lb (22,2 kN)
Minimum Service Temperature: -300 F (-340 C)
Materials: polyester, nylon, and galvanized steel
MAXIMUM 1 CONNECTION PER ANCHOR
CONCRETE MUST BE CURED PRIOR TO USE
2
90082 Rev. I - 2
Inspection Grid
User must inspect prior to EACH use. Competent
Person must complete formal inspection every
12 months.
Competent Person to inspect and initial.
Product lifetime is indefinite provided
equipment passes all pre-use and Competent
Person inspections.
If equipment fails inspection,
IMMEDIATELY REMOVE FROM SERVICE
Initials
Date
Date of First Use:
DO NOT REMOVE LABELS
3
WARNING
Never connect fall
protection system or
suspended component
to closed loop end!
7
1
Concrete Anchor Strap
ANSI/ASSP Z359.18-2017,
OSHA 1910.140 & 1926.502
WARNING Prior to use, read and
understand all instructions provided
by manufacturer at time of shipment
for proper use, inspection maintenance,
and inspection. Alteration, abuse or
misuse of this product may result in
serious injury or death.
Avoid contact with hazards, including,
but not limited to, heat, chemicals, elec-
tricity, and sharp or abrasive edges and
surfaces. NEVER make incompatible
connections.
PFAS equipment must be selected and
deemed compatible with Concrete
Anchor Strap by a Competent Person.
Type A Anchorage Connector
User Weight Range (including tools
and equipment): 100-420 lb (45-191 kg)
Minimum Breaking Strength (MBS):
5,000 lb (22,2 kN)
Minimum Service Temperature: -300
F (-340 C)
Materials: polyester, nylon, and
galvanized steel
MAXIMUM 1 CONNECTION PER ANCHOR
CONCRETE MUST BE CURED PRIOR
TO USE
2
Inspection Grid
User must inspect prior to EACH use.
Competent Person must complete
formal inspection every 12 months.
Competent Person to inspect and initial.
Product lifetime is indefinite provided
equipment passes all pre-use and
Competent Person inspections.
If equipment fails inspection,
IMMEDIATELY REMOVE FROM SERVICE
3
WARNING Never connect fall protection
system or suspended component to
closed loop end.
Publicité
