Publicité
English
Components
Protective Sheath
Specifications
Minimum Breaking Strength:
5,000 lb (22,2 kN)
Permitted Service Temperature Range:
-300 to 1300 F (-340 C to 540 C)
Anchorage Connector Type
(ANSI Z359.18) | Type A
Weight: 1.25 lb (0,45 kg)
Materials
Polyester, nylon, and galvanized steel.
Part #
Length
10710
3 ft (0,9 m)
10715
4 ft (1,2 m)
10717
6 ft (1,8 m)
10720
4 ft (1,2 m)
99-14-0009
3 1/2 ft (1 m)
99-14-0010
3 1/2 ft (1 m)
Part # 10715
Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing
Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing
Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing
Concrete Anchor Strap w/ Loop Ends
Concrete Anchor Strap w/Loop & D-ring Ends - Green Webbing
Concrete Anchor Strap w/Loop & D-ring Ends - Red Webbing
4
Substrate Requirements
Minimum Concrete Substrate Requirements:
Compression Strength: Minimum 3,500 psi
NEVER install Concrete Anchor Strap less than
6 in (153 mm) from any edge, hole, or corner.
WARNING!
Do not install into substrates
made
from
concrete that meets or exceeds these
minimum requirements.
Description
Anchor Webbing
D-Ring
Rebar Loop
materials
other
than
Publicité
